Aerospace & defense

Aerospace & defense fasteners, manufactured to your contract.

A manufacturing conversation built around your contract.

A clear starting point

A manufacturing conversation built around your contract.

Drawing revision, material traceability, dimensional acceptance, and documentation requirements belong in the first conversation. Cyclone welcomes aerospace and defense manufacturing inquiries for review against the specific part, contract, and approval requirements.

Supplier approval and contract eligibility are specific to each program. Required certifications, registrations, customer approvals, and flow-down clauses must be confirmed with Cyclone before award. Please arrange an approved transfer method before sending controlled drawings or technical data.
Bring the complete requirement
  1. Provide the drawing number, revision, and applicable specifications

  2. Identify customer approvals, quality clauses, and required certifications

  3. Define first-article and inspection documentation requirements

  4. Arrange an approved transfer method before sharing controlled technical data

Review published quality credentials
Relevant capabilities

Products. Processes. Proof.

A practical path from your requirement to a manufacturing review.

Threaded products

Studs, bolts, nuts, and custom threaded components.

Precision manufacturing

CNC turning, threading, cutting, marking, and inspection.

Documentation

Published certifications, equipment data, and technical references.

Military and aerospace standards

MS, NAS and AN fasteners,
machined from certified bar.

All mil-spec part families

Cyclone machines military and aerospace standard bolts and screws in Houston to the AN, MS (including the NASM and SAE AS reissues) and NAS sheets: hex head aircraft bolts, close-tolerance and shear bolts, drilled-head screws, shoulder bolts and non-magnetic hardware, #10 (0.190 in.) through 1-1/2 in. No minimum quantity. DFARS-compliant material on request. Material test reports and certificates of conformance ship with the order. CAGE 8HH90.

Aerospace & Defense procurement

Drawing and contract requirements first

Connect your project specification to a complete manufacturing and supply review. Clear material, dimensional and acceptance requirements help the team define the quote and the records needed at delivery.

Part and procurement scope

Provide drawing revision, critical characteristics, approved material sources where required, contract quality clauses, customer approvals and first-article requirements. Confirm the approved method before transferring controlled drawings or technical data.

Material grades and finishes

Cyclone’s published materials include alloy steel (4140, 4340, 8740, ASTM A193 B7 and A320 L7), 300- and 400-series stainless, 17-4 PH, A286, Monel®, Inconel®, Incoloy® and Hastelloy®, silicon bronze and brass, and titanium, sourced to the specification on the order with material test reports. Published product listings include ASTM A193 B7 and stainless B8/B8M studs with A194 2H, 2HM, Grade 7, 7M, Grade 8, 8M, 8A and 8MA nuts. Published finishes include cadmium, zinc, black oxide and fluoropolymer coatings, applied by partner facilities to the requirements on the order. These references are not a recommendation for a particular service; supply the required grade, condition and finish.

Dimensions and availability

Mil-spec bolts and screws are machined from #10 (0.190 in.) through 1-1/2 in., with #8 and larger diameters reviewed on request. Stud bolts and stainless steel studs are offered in diameters from 1/4 inch through 4 inches, with lengths to the customer’s specification. Heavy hex nuts range from 5/8 inch through 4 inches nominal diameter. For custom parts, send the complete drawing; size feasibility, material availability and delivery are confirmed for the order.

Standards, inspection and documentation

Cyclone is registered to AS9100D (manufacture) and AS9120B (distribution), with ISO 9001:2015 and API Spec Q1; CAGE code 8HH90. DFARS-compliant material is available on request (this refers to material sourcing; state the clause on your purchase order). These certificates do not establish program approval, military qualification or eligibility for a particular contract.

Questions before you quote

Do you make MS, NAS and AN part numbers?

Yes. Cyclone machines AN, MS (including the NASM and SAE AS reissues) and NAS bolts and screws from certified bar in Houston, with no minimum quantity. Send the complete part number with its dash number and code letters; the mil-spec family pages explain what each standard covers and how to read the number.

What information speeds up an RFQ?

Provide drawing revision, critical characteristics, approved material sources where required, contract quality clauses, customer approvals and first-article requirements. Confirm the approved method before transferring controlled drawings or technical data.

Are the listed grades approved for my application?

The customer or responsible engineer defines material suitability and the governing specification. Cyclone reviews the supplied manufacturing and documentation requirements; no universal application or customer-program approval is implied.

Can I combine standard hardware with drawing-specific work?

Yes. List each part separately with material, dimensions, quantity, finish and required documentation. The team reviews the complete scope and confirms the proposed delivery.

Discuss the requirement

Request a quote

Drawings & supporting files

Add up to three files: PDF, Excel, drawings or other supporting documents. The complete submission must be under 8 MB, including form details. Email larger files to inquiry@cyclonebolt.com.

Your request is sent to Cyclone’s sales team for review. Keep a copy of your submitted drawings and specifications.

Request a QuoteCall Cyclone