Production band sawing
DoALL DC-280NC
Our DC-280NC bandsaws support repeat cutting of metal bar stock into blanks for threaded products and machined components.
Built around the complete part.
Machining capabilities
DoALL and Behringer sawing. Landis threading. Doosan CNC machining. Dedicated finishing and identification equipment, working together in Houston.
01
Cutting & sawing
The right start for every part.
Dedicated band and cold saws prepare bar stock for the threading and machining operations that follow.
Cold sawing
Behringer HCS 100
A dedicated circular cold saw supports production cutoff work, preparing consistent blanks for downstream manufacturing.
Cold sawing
DoALL SC-75A
The SC-75A complements our cold-saw capacity for repeat bar-stock cutting and production blank preparation.
02
Landis threading
Threaded products are our core.
A fleet of Landis cut-thread machines, in single-head and double-head configurations, works alongside dedicated Landis roll-threading equipment.
Cut threading
Landis single-head cutters
Dedicated cut-thread equipment machines external threads to the form, pitch, class and length specified for the component.
Cut threading
Landis double-head cutters
Double-head machines complement our single-head fleet for stud and threaded-product production. The setup follows the end and overall-length requirements of the part.
Formed threads
Landis roll threading
Thread rolling forms the external thread with rolling dies. Material condition, blank diameter and thread requirements determine the manufacturing route.
03
Doosan CNC machining
Turning. Milling. Complete features.
Our CNC fleet is all Doosan: multiple PUMA and Lynx turning centers, supported by a vertical mill for drawing-controlled components.
CNC turning & live tooling
Doosan PUMA turning centers
PUMA equipment supports turned diameters, shoulders, grooves and threaded features, with live-tool operations reviewed against the drawing.
CNC turning & live tooling
Doosan Lynx turning centers
Our Lynx machines add flexible turning capacity for fasteners and custom components, from part setup through repeat production.
CNC milling
Doosan vertical mill
Vertical milling complements our turning operations for flats, holes and other drawing-defined features on custom manufactured parts.
04
Finishing & identification
The details that complete the part.
Dedicated finishing and marking equipment carries the component through end preparation, internal threading and permanent identification.
Part identification
Laser etching & engraving
Laser marking applies the identification specified for the order. Mark content, position and legibility are defined with the part requirements.
Chamfering & end preparation
MSI C3A-M ChamferMate
Our MSI ChamferMate machines prepare stud and bolt ends to the required edge geometry. The C3A-M combines chamfering and end marking in a compact machine, with operations selected for the part.
End stamping & identification
MSI MM-24 MarkMate
The MSI MarkMate applies impressed identification to the ends of studs, bolts and shafts. Adjustable part supports accommodate the required setup, with mark content and location defined by the order.
Internal threading
Nut-tapping drill presses
Dedicated drill-press tapping setups produce internal threads in nuts, complementing our external-thread manufacturing capabilities.
05
Production support
Air systems that support the floor.
Supporting systems are part of the manufacturing operation, too.
Compressed air & dryers
Dual Quincy air compressors
Two Quincy air compressors with dryers support the shop’s pneumatic equipment and manufacturing operations.
Start with the drawingThe process follows
The process follows
the requirement.
Send the part geometry, material condition, thread specification, quantity and acceptance criteria together.
Our team reviews the manufacturing route, workholding, inspection and documentation requirements for your component. Machine envelopes and achievable tolerances are confirmed during that review.
Published tolerance reference
General machining reference values. Material, geometry, setup and inspection requirements determine the tolerances quoted for a specific order.
| Operation | Standard Tolerance | Precision Tolerance | Measurement Method |
|---|---|---|---|
| CNC Turning (Diameter) | ±0.005" | ±0.001" | Micrometer |
| CNC Turning (Length) | ±0.010" | ±0.002" | Caliper, Height Gauge |
| Threading (Pitch Diameter) | ±0.003" | ±0.0005" | Thread Gauge, Optical |
| Surface Finish (Ra) | 63 μin | 16 μin | Profilometer |
| Concentricity/Runout | ±0.005" TIR | ±0.001" TIR | Dial Indicator |
| Perpendicularity/Squareness | ±0.003" | ±0.0005" | Square |
Published process & material references
Reference topics from our published machining information. Confirm the thread form, material, features and documentation required for your specific component with the Cyclone team.
Thread forms
- UN / UNC / UNF
- Metric M and MJ
- ACME and buttress
- API and NPT
- Custom forms and pitches
- Left-hand and multi-start
Machined features
- Undercuts and grooves
- Chamfers and radii
- Diamond and straight knurling
- Drilling and cross holes
- Keyways and flats
- Taper turning and boring
Material families
- Carbon and alloy steels
- 300 / 400 series stainless
- Duplex and super duplex
- Nickel alloys, including Inconel and Monel
- Titanium and specialty alloys
- Aluminum and brass
Documentation & process control
- First-article, material and dimensional reports
- Certificates of conformance
- In-process inspection and traceability
- Tool calibration and maintenance
- Process control charts and SPC
- Non-conformance reporting
Your specification.
Our next conversation.
Tell us what you need to manufacture. We’ll review the requirements, documentation, and delivery together.