Published 2026-11-16 · Cyclone Bolt

The BMW Group officially opened Plant Woodruff, a high-voltage battery assembly plant in Woodruff, South Carolina, on November 13, 2026, and said the opening marks the start of series production, according to the company's announcement. The plant will supply sixth-generation (Gen6) high-voltage batteries for the new BMW iX5, which BMW describes as its first fully electric model built in the United States. The Upstate Business Journal reported that the plant was more than three years and $700 million in the making.

What BMW announced

The facts in BMW's release:

  • Plant Woodruff has more than 300 employees and 250 robots.
  • The plant assembles Gen6 high-voltage batteries for installation in the new BMW iX5 and for future fully electric vehicles built at Plant Spartanburg.
  • Plant Spartanburg, BMW's vehicle plant, is about 15 miles away.
  • BMW sources the battery cells for its high-voltage batteries from leading cell manufacturers. The Woodruff plant assembles packs rather than making cells, BMWBLOG reported.

Raymond Wittmann, the BMW AG board member responsible for production, said in the release: "By 2030, we will be assembling at least six fully electric models at Plant Spartanburg." Robert Engelhorn, president and CEO of BMW Manufacturing Co., said: "We said we would begin assembling fully electric BMW vehicles in the US by the end of 2026."

Investment and scale

BMW's release did not give an investment figure for the plant. The Upstate Business Journal put it at $700 million and described it as part of an overall $1.7 billion BMW has invested in its South Carolina operations. BMWBLOG reported that the $700 million battery plant covers more than one million square feet and was part of a $1.7 billion package BMW announced in 2022, with the opening coming a little over three years after construction began.

BMWBLOG also reported that finished packs travel by truck about 15 miles to Plant Spartanburg, where iX5 production is due to start before the end of the year, and that BMW has not said how many packs Woodruff can build in a year. The Upstate Business Journal reported that the plant's 300 associates and 250 robots are aided by artificial intelligence assistants.

What it means for bolting and fastener supply

A high-voltage battery pack is, for the most part, a bolted assembly. Cell modules are typically clamped into a tray, the cover is fastened to the tray, busbars and terminals are secured with threaded hardware, and the finished pack is bolted to the vehicle body. Each of those joints is a threaded fastener that has to hold under vibration, thermal cycling and, for the electrical connections, a stable clamp load over the life of the vehicle. Automotive buyers typically specify the fastener grade, the thread form and the coating on the drawing, and they commonly require production part approval documentation, lot traceability and consistent plating from the supplier. The requirements come from the automaker's engineers, not from the fastener maker.

The plant itself is the other fastener story. A facility of more than one million square feet with 250 robots is a large consumer of construction and plant fasteners: anchor bolts that tie robot cells, conveyors and press equipment to the slab, structural bolts for the building frame and mezzanines, and threaded rod and heavy hex nuts for the electrical gear, cooling equipment and fire protection that an assembly plant runs on. Project specifications for this kind of work typically call for anchor bolts and hex bolts made to a named ASTM grade, with the nut and washer grades paired to the bolt, the finish stated on the drawing, and mill test reports that trace each lot back to its heat of steel. The engineer of record sets those requirements.

The location also matters for sourcing. BMW's release notes that the battery plant sits 15 miles from the vehicle plant it feeds. The questions plant buyers typically ask of a fastener source run along the same lines: whether the material is documented, whether the quality system can be audited, how far the parts have to travel, and whether the source can cover the shorts at the end of a build.

Where Cyclone fits

Cyclone Bolt is a Houston, Texas manufacturer of fasteners, threaded products and custom machined components, established in 2016. The company makes stud bolts, heavy hex nuts, hex bolts and cap screws, double-end and tap-end studs, washers and gaskets, and custom machined components, and holds AS9100D, AS9120B, ISO 9001:2015, API Spec Q1, API 20E and API 20F certifications. Cyclone is supplying several large data center builds in Texas and welcomes more, from full-build take-offs to the shorts at the end of a project.

If you are specifying bolting for a plant build or a production line, request a quote.

Sources

Related on cyclonebolt.com